Diesel fuel injection pumps SPP Series produced by DETEQ are equipped with an exclusive system for power control which allows to obtain, for 3 consecutive minutes, the twice the installed engine nominal power.
EXAMPLE
Engine with power 5,5kW >> 11kW for 3 minutes: the sufficient time for a flow test with a test cycle of 1000 shots
STANDARD PRODUCTION MODELS
8 cylinder version available in the following powers:
- 5,5 kW ( 7,5HP)
- 7,5kW (10HP)
- 9,2 kW (12,5HP)
12 cylinder version available in the following powers:
- 5,5 kW ( 7,5HP)
- 7,5 kW (10HP)
- 11 kW (15HP)
SPP TEST BENCH TECHNICAL FEATURES
| ITEM | SPECIFICATION | |
|---|---|---|
| DRIVE MOTOR | AC 220-380V/3P/ 50-60Hz, 4 pole induction motor (control by inverter) |
|
| SPEED RANGE | 0 - 3500 rpm in both directions | |
| PUMP MOTOR | AC 3ph 0,75 KW ( 1HP ) 4 pole induction motor | |
| PUMP | Max output pressure 6MPA ( working pressure: 0÷5 BAR ) | |
| Max output flow 9 l/min Vane pump | ||
| FUEL TANK | 40 liters working capacity | |
| TEMPERATURE CONTROL | Variable from 40° +/- 2° with display 0-99,9°C | |
| HEATER | AC 220V 0,8KW | |
| SPEED CONTROL | Adjustable from ZERO to MAX through 2 steps ( accurate and quick ) | |
| GLASS | 260cc and 44cc both sides | |
| STROKE COUNTER | 0 - 1000 in steps of 50 turns | |
| RPM COUNTER | 4 digit 7 segment LED display ( 0-9999 rpm indication) with accuracy 0,1% | |
| VM.VE ( ROTARY) FUEL CONTROL VALVE | 0,2 ÷ 2 BAR supply pressure control | |
| LOW (PE. IN LINE) FUEL CONTROL VALVE | 0,5 BAR supply pressure control | |
| PE.A( IN LINE ) / VM.VE ( ROTARY) PRESSURE GAUGE | Ø 100 -1/0/5 BAR with glycerol |
|
| TRANSFER PRESSURE GAUGE | Ø 100 0 ÷ 16 BAR with glycerol |
|
| OVERFLOW PRESSURE GAUGE | Ø 100 0 ÷ 1,6 BAR with glycerol |
|
| HIGH PRESSURE GAUGE | Ø 100 0 ÷ 60 BAR with glycerol |
|
| GOVERNOR PRESSURE GAUGE ( LDA ) | Ø 100 0 ÷ 2,5 BAR with glycerol |
|
| VACUUM REGULATOR | For test the feeder system | |
| AIR REGULATOR | 0÷2,5BAR | |
| RACK SCALE | On request | |
| FILTERING SYSTEM | 2 levels 10 - 5 micron | |
| FLYWHEEL | Ø 420 mm with increments each 0,5° for high accuracy timing FIP |
|
| INERTIA | 1 Kgm2 | |
| CENTER HEIGHT | 125mm guide 20mm | |
| CENTER HEIGHT AND AXES DEVIATION |
+/- 0,02 mm | |
| OVERLOAD CAPACITY | 200% for 3 minutes | |
| POWER SAVING SYSTEM | 40% | |
| ANTI-BACKLASH COUPLING | with protection cover | |
| NOICE EMISSION | Low | |
| HIGH TORQUE CAPACITY | 108 Nm constant till 1050 RPM | |
| ISO RULES | Comply with ISO 4008/1 and ISO 4008/2 | |
| DRIVING CAPACITY FIP | Up to 600 mm3 / injection / cylinder | |
| AIR CONNECTION | 1/4 GAS 2÷10BAR | |
| FREE MAINTENANCE | ||
| EASY TO USE | ||
| SAFETY FOR THE USER | ||
| PACKING DIMENSION AND WEIGHT | mm 2000 x 1000 x 2000h - 400 Kg | |
| NET WEIGHT | 800 Kg | |
Additional information is available on the website http://open.deteq.com/catalog2013/index.html#/30/#/30/
Comments